FEATURES
Display readings : Three semi-liquid crystal display, maximum reading low-frequency 1999V/M / High Frequency 1999μW/cm2.Level : low-frequency V/m, high-frequency: μW/cm2Wide range of detectable frequencyIt can detect the electromagnetic radiation everywhereComply with CEEasy to operate, it can detect the power of electromagnetic radiation around homePortable and lightweight
Specifications
Dimensions
(5.28 x 2.83 x 1.18)" / (13.4 x 7.2 x 3)cm (L x W x H)
Color
Black
Material
Metal & Plastic
Modle
DT1130
Measurement time intervals
0.4 seconds
Operation voltage
9V
Measure frequency range
low frequency: 50Hz-400KHz; high frequency: 30MHz-2000MHz
Operation temperaturer
-15°C - 60°C
Power Supply
1 x 6F22 9V Battery(Not Included)
Battery Capacity
800mAh
Package Includes
1 x Electromagnetic Radiation Detector1 x English / Chinese User Manual
Extra Info
Measuring Steps:
1.Switch on the radiation tester and aim at the testing object.
2.Hold the tester and slowly close to the object until the tester touches the object.The shorter the distance is, the greater the radiation it has.(Notice: For high-voltage object, it is advisable to keep the tester a certain distance away from the object.)
3.Change the angle of the tester during the test to achieve accurate measurement.
4.Keep the object on during measurement. If you switch off the device during the process and there is no device nearby, the figure in the tester will become zero.Notes:
1.The dosimeter is for testing the electric field radiation. If the test equipment earthing shielded, the test would fail.
2.Metal will shield the radiation, too.
3.If the meter keeps display "0" while testing, please change a battery and test again.